CNC Operators - Casing

Share:

Job Title: CNC Operator                                                                                           Date: ____________

 

Department: End Finish                   

 

Supervisor’s Title: End Finish Lead Person

 

Training Requirements:

1.      TTP Orientation.

2.      Company Basic practices; Safety, QA & HR Policy.

3.      Relevant Standard Operating Procedures.

4.      Identification and traceability, Product marking and Test Status activities.

5.      Control of Non-conformances.

 

Education Requirements:

1.      Minimum of high school or better preferred.

 

Experience Requirements:

1.      Minimum 3 Months of pipe threading experience.

2.      Basic knowledge of CNC machining and changing off sets on the machine.

3.      Ability to read and understand Work Order Instructions.

 

Responsibilities:

1.      Verify workability of the equipment for safety purpose.

2.      Check material against work order instruction.

3.      Roll pipe off tables onto feeding rolls and advance pipe into chuck.

4.      Press button for cycle start.

5.      Release lock, unscrew pipe and pull out pipe.

6.      Check with inspector for dimensions and tolerance, and change off sets if product is out of tolerance.

7.      Operate kick-off lever removing pipe from rolls.

8.      While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. The employee must be able to lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

9.      Position requires to be exposed to High temperatures depending on the season. The position also requires to be exposed to noise levels ranging from moderate to high.

10.  NOTE: This job description is not intended to be all-inclusive. Employee may perform additional related duties, as per management, to meet the ongoing needs of the organization.

 

Tools and Equipment:

CNC Lathes, Chasers & Inserts and Hand Tools.

TEJAS TUBULAR PRODUCTS INC is an EEO employer - M/F/Vets/Disabled
 
By clicking the button, I agree to the GetHired Terms of Service
GetHired.com member? Login to Apply