Machine Operator
KSM Castings NC, Inc. Job Specification No.: CPCMACOP Rev.: 3
Date: 02/15/2019
Job Designation: CPC Machine Operator
Salary Class: Hourly
Department: CPC Machining
Specialist section: MA
Duties (Brief description of the principal task involved):
Loading and unloading of the processing machines with castings with subsequent inspection of the
parts for rejects according to the test instructions
Description of activities (List of all key tasks/processes actually carried out):
Must place castings in the nest/ carrier / fixture (clamp it pneumatically,
hydraulically, mechanically or by hand) and initiate the cycle by push-
button.
Unclamp / nest/ fixture and unload the part after machining and cleans
the device for the next part.
Must, during the automatic work sequence and as and when required
wash, inspect and prepare the previous part, inspect it according to the
testing and work instructions (operator self-inspection) and then deposit it
in a container pack it ready for dispatch.
Follows written processes and maintain records and appropriate data.
Learn to trouble-shoot robots and other problems as they occur on
automatic line.
Must follow work instructions and quality instructions.
Responsible for identifying Environmental Aspects for his/her department,
and supporting Environmental Management Plan (EMP) goals and targets
through training, engagement and communication.
WORK ENVIRONMENT
While performing the duties of this position, the employee must comply with all
safety regulations and proper operating procedures, utilizing required safety
equipment at all times. Employees are obligated to leave workplace in a clean
and orderly manner. Must collaborate in the bridging of break times, and briefly
inform the succeeding operator of activities that took place during his or her shift.
Reasonable accommodations may be made to enable individuals with disabilities
to perform the essential functions of this position.
Education/Professional Requirements:
Required proficiencies and
additional qualification:
Special requirements:
- High School Diploma or
Equivalent
- Career Readiness
Certificate (CRC) Preferred
- Experience in the field of metalworking,
machining or basic CNC knowledge is
desirable
- Experience in the field of line automation
is desirable
- Working knowledge of manufacturing Blue
Print Reading preferred
Teamwork capability
Ability to work multiple shifts
Subject to directives from: Shift Leader / CNC Lead
Authorized to issue directives to: None
Signatures (Date____________)
Manager HR Incumbent